06-07 Honda Accord Front and Rear Ceramic 5 Lug Brake Rotors and pads
Fitment:
- Honda | Accord | 2006~2007 | 3.0L
The most effective means to accomplish a proper brake job is to replace the rotors and pads.
If you want to retain your OE brake performance, 's product is the perfect kit.
has simplified your shopping experience by creating brake kits to fit your needs without searching out all the necessary components.
Feature
- The very same manufacturing process the original equipment manufacturers use
- High-density friction material for long pad life
- Reduced dusting for both Ceramic and Semi-metallic materials
- Quality multi-layered shims and pad chamfering provide smooth and quiet braking
Product Specifics
- Items Included: Brake Disc+Brake Pad
- Finish: Zinc Plated
- Material: Ceramic
- Brake Pad Compound: Ceramic Low Dust Formula
- Placement on Vehicle: Front+Left+Right
- Warranty: 1 Year
- Interchange Part Number: ceramic brake pads,31275,31479, rotor brake discs Kit Front & Rear
- UPC: Does not apply
- Rotor Material: G3000 Rotor Casting
- OE Spec or Performance/Custom: Performance/Custom
- Rotor Outside Diameter: 11.75 in (298.4 mm)
- Rear Rotor Outside Diameter: 11 in (279.4 mm)
- Mounting Hardware Included: No
- Pads Surface Finish: Thermal Scorched
- Rotor Style: Drilled & Slotted
- Fitment Type: Direct Replacement
- Superseded Part Number: 787,537, ceramic brake pads Rotor,brakes and rotors disc,disk
- Bolt Hole Quantity: 5
- Custom Bundle: Yes
- Solid or Vented Rotor: Vented
- Suitable for: Disc
- OE/OEM Part Number: 31275,31479,787,537
- Type: Brake Disc Rotor
- Item Height: 47(mm)
- Rotor Center hole diameter(mm): 64.4
- Rear Rotor Center hole diameter(mm): 64.1
- Rotor Pitch circle diameter(mm): 114.3
- Rear Rotor Pitch circle diameter(mm): 114.1
- Item Thickness: 28
- Rotor Disk minimum thickness(mm): 26
- Rear Rotor Disk minimum thickness(mm): 8
- Performance Part: Yes
- Universal Fitment: No
- Features: Low Dust
- Type: Brake Pad Set
Includes
4 Pcs Brake Disc(s)/Rotor(s)+8 Pcs Brake Pads
Brake Maintenance Tips:
The following inspections and maintenance procedures can help prevent potential brake problems:
1. Check the brake fluid level at every oil change. Replace fluid according to the vehicle Owner¡¯s Manual recommendations.
2. Calipers and wheel cylinders should be checked at every brake inspection and serviced or replaced as required
3. Inspect the brake lines for rust, punctures, or visible leaks. (You may be able to do this, but consult a qualified technician if necessary.)
4. Check the thickness of your brake pads
A qualified technician should conduct the following:
1. Inspection of the brake hoses for brittleness or cracking.
2. Inspection of brake lining and pads for wear or contamination by brake fluid or grease.
3. Inspection of wheel bearings and grease seals.
4. Parking brake adjustments (as needed).
5. Connect the regulator to the new motor.
Feature Categories
You May Also Like