1994-2004 Ford Mustang Brake Rotors Drilled Slotted Front 273.05mm 5 Lugs 2 Pcs
Fitment:
- Ford | Mustang | 1994~2004 | 3.8L/3.9L/4.6L/5.0L
Brake Rotor is manufactured and tested to the strictest OE standards for unparalleled performance.
The new brake rotors are characterized by special drillings which combine the appealing aesthetic effect with brilliant performance and effective braking in all conditions.
The low environmental impact and the excellent corrosion resistance allow brake rotors to establish a new benchmark for protective treatment.
Feature
- Rotors are manufactured with G3000 iron castings to match OEM specifications for durability, reliability, and stability
- Rotors are 100% precision mill-balanced for smoother stopping and zero vibration at any speed
- Non-directional rotor finish promotes faster break-in and smoother stops
- Quality multi-layered shims and pad chamfering provide smooth and quiet braking
Product Specifics
- Rotor Style: Drilled & Slotted
- Items Included: Brake Disc(s)/Rotor(s)
- Finish: Silver Zinc Dichromate
- Placement on Vehicle: Front, Left, Right
- Manufacturer Warranty: 1 Year
- Interchange Part Number: drilled and slotted 54011, rotor brake discs, front rotors
- UPC: Does not apply
- Material: G3000 Rotor Casting
- OE Spec or Performance/Custom: Performance/Custom
- Brake Rotor Size: 10.75in. (273.05mm)
- Fitment Type: Direct Replacement
- Superseded Part Number: Driver passenger side disc brakes breaks, brakes, and rotors
- Lug Count: 5
- Solid or Vented Rotor: Vented
- Front Rotor Total height(mm): 46.5
- Front Rotor Center hole diameter(mm): 71
- Front Rotor Pitch circle diameter(mm): 114.3
- Front Rotor Plate thickness(mm): 26
- Front Rotor Disk minimum thickness(mm): 26
Brake Maintenance Tips:
The following inspections and maintenance procedures can help prevent potential brake problems:
1. Check the brake fluid level at every oil change. Replace fluid according to the vehicle Owner¡¯s Manual recommendations.
2. Calipers and wheel cylinders should be checked at every brake inspection and serviced or replaced as required
3. Inspect the brake lines for rust, punctures, or visible leaks. (You may be able to do this, but consult a qualified technician if necessary.)
4. Check the thickness of your brake pads
The following should be conducted by a qualified technician:
1. Inspection of the brake hoses for brittleness or cracking.
2. Inspection of brake lining and pads for wear or contamination by brake fluid or grease.
3. Inspection of wheel bearings and grease seals.
4. Parking brake adjustments (as needed).
5. Connect the regulator to the new motor.
Includes
2 Pcs Brake Disc(s)/Rotor(s)
Feature Categories
You May Also Like