1994-2004 Ford Mustang Ceramic Brake Pads And Rotors Rear
Fitment:
- Ford | Mustang | 1994~2004 | 3.8L/3.9L/4.6L/5.0L
The most effective means to accomplish a proper brake job is to replace the rotors and pads.
If you are looking to retain your OE brake performance, 's product is the perfect kit for you.
has simplified your shopping experience by creating brake kits designed to fit your needs without having to search out all the necessary components.
Feature
- The very same manufacturing process the original equipment manufacturers use
- High-density friction material for long pad life
- Reduced dusting for both Ceramic and Semi-metallic materials
- Quality multi-layered shims and pad chamfering provide smooth and quiet braking
Product Specifics
- Items Included: Brake Disc+Brake Pad
- Finish: Zinc Plated
- Material: Ceramic
- Brake Pad Compound: Ceramic Low Dust Formula
- Placement on Vehicle: Left+Right+Rear
- Warranty: 1 Year
- Interchange Part Number: slotted rear pads and rotors 54017,discs,pad,Brake kit
- UPC: Does not apply
- Rotor Material: G3000 Rotor Casting
- OE Spec or Performance/Custom: Performance/Custom
- Rotor Outside Diameter: 10.5 in (266.7 mm)
- Mounting Hardware Included: No
- Pads Surface Finish: Thermal Scorched
- Rotor Style: Slotted
- Fitment Type: Direct Replacement
- Superseded Part Number: Driver passenger side disc brakes breaks,883,ceramic brake pads
- Bolt Hole Quantity: 5
- Custom Bundle: Yes
- Solid or Vented Rotor: Vented
- Suitable for: Disc
- OE/OEM Part Number: front pads and rotors,rotors and pads kit,replacing,Pads discs
- Type: Brake Disc Rotor
- Item Height: 50(mm)
- Rotor Center hole diameter(mm): 70.9
- Rotor Pitch circle diameter(mm): 114.3
- Item Thickness: 14
- Rotor Disk minimum thickness(mm): 13
- Performance Part: Yes
- Universal Fitment: No
- Features: Low Dust
- Type: Brake Pad Set
Brake Maintenance Tips:
The following inspections and maintenance procedures can help prevent potential brake problems:
1. Check the brake fluid level at every oil change. Replace fluid according to the vehicle Owner¡¯s Manual recommendations.
2. Calipers and wheel cylinders should be checked at every brake inspection and serviced or replaced as required
3. Inspect the brake lines for rust, punctures, or visible leaks. (You may be able to do this, but consult a qualified technician if necessary.)
4. Check the thickness of your brake pads
The following should be conducted by a qualified technician:
1. Inspection of the brake hoses for brittleness or cracking.
2. Inspection of brake lining and pads for wear or contamination by brake fluid or grease.
3. Inspection of wheel bearings and grease seals.
4. Parking brake adjustments (as needed).
5. Connect the regulator to the new motor.
Includes
2 Pcs Rear Brake Disc(s)/Rotor(s)+4 Pcs Front Brake Pads
Feature Categories
You May Also Like