Fitment:
- Jeep | Grand Cherokee | 1999~2004 | 4.0L/4.7L
brake pads are made with application-specific materials to meet the demands of sophisticated systems in modern vehicles.
Long-lasting brake pads are designed to deliver a consistent pedal feel and superb brake response.
Rubber-Steel-Rubber shims reduce noise, vibration, and harshness.
Feature
- Post-cured to eliminate friction material impurities
- Positive mold to ensure consistent material density
- Slotted to dissipate heat and prevent brake fade
- Chamfered to reduce noise when braking
Product Specifics
- Placement on Vehicle: Front+Left+Right
- Pad Material: Ceramic
- UPC: 712367164225
- Fitment Type: Direct Replacement
- Manufacturer Warranty: 1 Year
- OE Spec or Performance/Custom: Performance/Custom
- Suitable for: Disc
- Custom Bundle: No
- Mounting Hardware Included: No
- Pad Features 1: Slotted
- Rubber-Steel-Rubber shim: Yes
- Surface Finish: Thermal Scorched
- Interchange Part Number: 945,Brakes Pad, Left & Right ; Driver & Passenger Side
- Thickness Inner Pad (mm): 18.1
- Length Inner Pad (mm): 157.71
- Height Inner Pad (mm): 60.45
- Superseded Part Number: Ceramic Pad,ceramic brakes,brakes pads
Note
Jeep used 2 different types of front brake calipers on the Grand Cherokee (Akebono, and Teves). This front brake pad set is only correct for Akebono brand calipers. The easy way to tell the difference is if you look at your front and rear calipers and they are different you have the Akebono's in the front. If they all look the same you have the Teves style. This set is correct for Akebono calipers only.
Brake Maintenance Tips:
The following inspections and maintenance procedures can help prevent potential brake problems:
1. Check the brake fluid level at every oil change. Replace fluid according to the vehicle Owner¡¯s Manual recommendations.
2. Calipers and wheel cylinders should be checked at every brake inspection and serviced or replaced as required
3. Inspect the brake lines for rust, punctures, or visible leaks. (You may be able to do this, but consult a qualified technician if necessary.)
4. Check the thickness of your brake pads
The following should be conducted by a qualified technician:
1. Inspection of the brake hoses for brittleness or cracking.
2. Inspection of brake lining and pads for wear or contamination by brake fluid or grease.
3. Inspection of wheel bearings and grease seals.
4. Parking brake adjustments (as needed).
5. Connect the regulator to the new motor.
Includes
4 Pieces Front Brake Pads