Fitment
- Chevrolet | Avalanche | 2007~2013 | 5.3L/6.0L
- Chevrolet | Silverado 1500 | 2007~2023 | 2.7L/3.0L/4.3L/4.8L/5.3L/6.0L/6.2L
- Chevrolet | Suburban | 2015~2023 | 3.0L/5.3L/6.0L/6.2L
- Chevrolet | Suburban 1500 | 2007~2014 | 5.3L/6.0L
- Chevrolet | Tahoe | 2007~2023 | 3.0L/4.8L/5.3L/6.0L/6.2L
- GMC | Sierra | 2007~2023 | 5.3L/6.2L
- GMC | Sierra 1500 | 2007~2023 | 2.7L/3.0L/4.3L/4.8L/5.3L/6.0L/6.2L
- GMC | Yukon | 2007~2023 | 3.0L/4.8L/5.3L/6.0L/6.2L
- GMC | Yukon XL | 2015~2018/2020~2023 | 3.0L/5.3L/6.2L
- GMC | Yukon XL 1500 | 2007~2014 | 5.3L/6.0L/6.2L
Features
Levels vehicle and eliminates vehicle rake.
Enhances appearance by giving the it a more even stance.
Offers extra ground clearance to use larger tires & wheels.
CNC machined billet aluminum construction for maximum strength and increased safety.
Product Specifics
- Placement on Vehicle: Left; Right; Front
- UPC: Does not apply
- Quantity: 2X Front Lift Kit
- Lift Height: 1" Front
- Actual Thickness: appr. 15mm/ 0.59"
- Note: Lift amount does NOT equal spacer thickness
- Drive: 2WD 4WD
- Condition: New
- OE Spec or Performance/Custom: Performance/Custom
- Interchange Part Number: Chevrolet Silverado Suburban Avalanche Tahoe 2WD/4WD
- Other Part Number: 2007-2018 GMC Sierra Yukon 2WD/4WD
- Adjustable: No
- Part Type: Suspension Lift Kit
- Kit or Single Part: Kit
- Ship from: CA/ GA
- Superseded Part Number: Leveling Kit Lift Front 1" Height
- Fitment Type: Direct Replacement
- Material: Billet Aluminum
- Surface Finish: Corrosion / Oxidation Resistant
- Included Hardware: Mounting Hardware
- Color: Black
Note
Lift spacer thickness and lift is not a 1 to 1 ratio due to the suspension geometry.
The ratio of lift to spacer thickness is not one to one. Due to the design of the independent suspension of the truck, when you extend the strut by 1-1/4" (for 2" lift), 1-5/8" (for 2.5" lift) or 1-3/4??¨¤ (for 3" lift) the angle of the strut becomes steeper allowing the truck to experience approximately 2", 2.5" or 3??¨¤ of lift, respectively. It is the combination of extending the strut and the change in angle that gives the full lift. Once the kit is properly installed and you have the truck aligned, you will see the lift you expect. Remember that the installation is not complete until you have the truck aligned.
This lift kit will raise the front of your vehicle by a true 1".
The real thickness is 15mm.
Profession installation is highly recommended.
Please allow 1-3cm error due to manual measurement. Thanks for your understanding.
Other Kits
2" Front 2" Front Sliver 2.5" Front 2.5" Front Red 1/2" Front 1.5" Front
Front Leveling lift kit 1" for Chevy Silverado GMC Sierra GM 1500 LM 2007-2019