2002-2004 Honda Odyssey Brake Rotors Front And Rear 5Lugs 4Pcs
Fitment:
- Honda | Odyssey | 2002~2004 | 3.5L
Brake Rotor is manufactured and tested to the strictest OE standards for unparalleled performance.
The new brake rotors are characterized by special drillings which combine the appealing aesthetic effect with brilliant performance and effective braking in all conditions.
The low environmental impact and the excellent resistance to corrosion allow brake rotors to establish a new benchmark for protective treatment.
Feature
- Rotors are manufactured with G3000 iron castings to match OEM specifications for durability, reliability, and stability
- Rotors are 100% precision mill-balanced for smoother stopping and zero vibration at any speed
- Non-directional rotor finish promotes faster break-in and smoother stops
- Quality multi-layered shims and pad chamfering provide smooth and quiet braking
Product Specifics
- Finish: Zinc Plated
- Rear Rotor Style: Slotted
- Placement on Vehicle: Front, Left, Right, Rear
- Solid or Vented Rear Rotor: Solid
- Items Included: Brake Disc
- UPC: Does not apply
- Rear Rotor Outside Diameter: 12.25 in (311.1 mm)
- Item Height: 47mm
- Front Disc Center hole diameter: 64.4mm
- Front Disc Pitch circle diameter: 114.3mm
- Item Thickness: 28mm
- Discard Thickness: 26mm
- Bolt Hole Quantity: 5
- Universal Fitment: No
- Fitment Type: Direct Replacement
- Rotor Style: Drilled & Slotted
- OE Spec or Performance/Custom: Performance/Custom
- Solid or Vented Rotor: Vented
- Manufacturer Warranty: Lifetime
- Type: Brake Disc Rotor
- Rotor Outside Diameter: 11.75 in (298.4 mm)
- Interchange Part Number: driver passenger side disc brakes break,31275,31317, disc rotor
- Superseded Part Number: disc brake rotor replacement, Drill Slot, Front And Rear LH RH
- Rear Item Height: 67.1mm
- Rear Disc Center hole diameter: 64.2mm
- Rear Disc Pitch circle diameter: 114.3mm
- Rear Item Thickness: 11mm
- Rear Discard Thickness: 9mm
- Lug Count: 5
Brake Maintenance Tips:
The following inspections and maintenance procedures can help prevent potential brake problems:
1. Check the brake fluid level at every oil change. Replace fluid according to the vehicle Owner¡¯s Manual recommendations.
2. Calipers and wheel cylinders should be checked at every brake inspection and serviced or replaced as required
3. Inspect the brake lines for rust, punctures, or visible leaks. (You may be able to do this, but consult a qualified technician if necessary.)
4. Check the thickness of your brake pads
The following should be conducted by a qualified technician:
1. Inspection of the brake hoses for brittleness or cracking.
2. Inspection of brake lining and pads for wear or contamination by brake fluid or grease.
3. Inspection of wheel bearings and grease seals.
4. Parking brake adjustments (as needed).
5. Connect the regulator to the new motor.
Includes
4 Pcs Brake Disc(s)/Rotor(s)
Feature Categories
You May Also Like