2004-2010 Toyota Sienna Brake Ceramic Pads Front and Rear 8 Pcs
Fitment:
- Toyota | Sienna | 2004~2010 | 3.3L/3.5L
brake pads are made with application-specific materials to meet the demands of sophisticated systems in modern vehicles.
Long-lasting brake pads are designed to deliver a consistent pedal feel and superb brake response.
Rubber-Steel-Rubber shims reduce noise, vibration, and harshness.
Feature
- Post-cured to eliminate friction material impurities
- Positive mold to ensure consistent material density
- Slotted to dissipate heat and prevent brake fade
- Chamfered to reduce noise when braking
Product Specifics
- Items Included: Brake Pad(s)
- Finish: OE Grade Multi-Layer Shim
- Brake Pad Style: Ceramic
- Placement on Vehicle: Left, Right, Front, Right
- Warranty: 1 Year
- UPC: Does not apply
- Fitment: Direct Replacement
- Pad(s) Material: Low Dust Ceramic
- Pad Style: Anti Noise Shim
- Features 1: Environmentally Compliant
- Features 2: Positive Mold Technology
- Features 3: Professional Grade Ceramic Brake Pads
- Front Brake Pad Inner Lenth(mm): 188.57
- Rear Brake Pad Inner Lenth(mm): 112.78
- Front Brake Pad Inner height(mm): 56.6
- Rear Brake Pad Inner height(mm): 42.8
- Front Brake Pad Inner thickness(mm): 17.4
- Rear Brake Pad Inner thickness(mm): 16.56
Brake Maintenance Tips:
The following inspections and maintenance procedures can help prevent potential brake problems:
1. Check the brake fluid level at every oil change. Replace fluid according to the vehicle Owner¡¯s Manual recommendations.
2. Calipers and wheel cylinders should be checked at every brake inspection and serviced or replaced as required
3. Inspect the brake lines for rust, punctures, or visible leaks. (You may be able to do this, but consult a qualified technician if necessary.)
4. Check the thickness of your brake pads
The following should be conducted by a qualified technician:
1. Inspection of the brake hoses for brittleness or cracking.
2. Inspection of brake lining and pads for wear or contamination by brake fluid or grease.
3. Inspection of wheel bearings and grease seals.
4. Parking brake adjustments (as needed).
5. Connect the regulator to the new motor.
Includes
8 Pcs Brake Pads Front and Rear
Feature Categories
You May Also Like