2008-2010 Honda Accord Front and Rear Brake Ceramic Pads
Fitment:
- Honda | Accord | 2008~2010 | 2.4L
The most effective means to accomplish a proper brake job is to replace the rotors and pads.
If you are looking to retain your OE brake performance, 's product is the perfect kit for you.
has simplified your shopping experience by creating brake kits designed to fit your needs without having to search out all the necessary components.
Feature
- The very same manufacturing process the original equipment manufacturers use
- High-density friction material for long pad life
- Reduced dusting for both Ceramic and Semi-metallic materials
- Quality multi-layered shims and pad chamfering provide smooth and quiet braking
Premium Positive Molded Brake Pads Features and Benefits
The very same manufacturing process the original equipment manufacturers use
High density friction material for long pad life
Less resin content virtually eliminates brake fade and glazing
Reduced dusting for both Ceramic and Semi-metallic materials
Quality multi-layered shims and pad chamfering provide smooth and quiet braking
Product Specifics
- Placement on Vehicle: Front+Rear+Left+Right
- Pad Material: Ceramic
- UPC: Does not apply
- Fitment Type: Direct Replacement
- Manufacturer Warranty: 1 Year
- OE Spec or Performance/Custom: Performance/Custom
- Suitable for: Disc
- Custom Bundle: Yes
- Mounting Hardware Included: No
- Pad Features 1: Slotted
- Rubber-Steel-Rubber shim: Yes
- Surface Finish: Thermal Scorched
- Interchange Part Number: 958,1451,Brakes Pad, Left & Right ; Driver & Passenger Side
- Front Thickness Inner Pad (mm): 16.6
- Front length Inner Pad (mm): 141.73
- Front height Inner Pad (mm): 56.6
- Rear Thickness Inner Pad (mm): 14.7
- Rear length Inner Pad (mm): 93.6
- Rear height Inner Pad (mm): 46.64
- Superseded Part Number: Ceramic Pad,ceramic brakes,brakes pads
Includes
8 Pcs Brake Pads Front and Rear
Brake Maintenance Tips:
The following inspections and maintenance procedures can help prevent potential brake problems:
1. Check the brake fluid level at every oil change. Replace fluid according to the vehicle Owner¡¯s Manual recommendations.
2. Calipers and wheel cylinders should be checked at every brake inspection and serviced or replaced as required
3. Inspect the brake lines for rust, punctures, or visible leaks. (You may be able to do this, but consult a qualified technician if necessary.)
4. Check the thickness of your brake pads
The following should be conducted by a qualified technician:
1. Inspection of the brake hoses for brittleness or cracking.
2. Inspection of brake lining and pads for wear or contamination by brake fluid or grease.
3. Inspection of wheel bearings and grease seals.
4. Parking brake adjustments (as needed).
5. Connect the regulator to the new motor.
Feature Categories
You May Also Like