2014-2015 Honda Accord Brake Rotors Ceramic Pads Rear 279.4mm 5Lugs 6Pcs
Fitment:
- Honda | Accord | 2017 | 3.5L
The most effective means to accomplish a proper brake job is to replace the rotors and pads.
If you want to retain your OE brake performance, 's product is the perfect kit.
has simplified your shopping experience by creating brake kits to fit your needs without searching out all the necessary components.
Feature
- The very same manufacturing process the original equipment manufacturers use
- High-density friction material for long pad life
- Reduced dusting for both Ceramic and Semi-metallic materials
- Quality multi-layered shims and pad chamfering provide smooth and quiet braking
Product Specifics
- Finish: Silver Zinc Dichromate
- Manufacturer Warranty: Lifetime
- UPC: Does not apply
- OE Spec or Performance/Custom: Performance/Custom
- Rotor Style: Slotted
- Superseded Part Number: Driver passenger side disc brakes breaks, brakes and rotors
- Solid or Vented Rotor: Solid
- Rear Rotor Total height(mm): 48.8
- Rear Rotor Pitch circle diameter(mm): 114.1
- Rear Rotor Disk minimum thickness(mm): 8
- Items Included: Brake Disc(s)/Rotor(s)
- Placement on Vehicle: Left, Right, Rear
- Interchange Part Number: slotted 31479, rotor brake discs, Rear rotors
- Material: G3000 Rotor Casting
- Brake Rotor Size: 11.00in. (279.4mm)
- Fitment Type: Direct Replacement
- Lug Count: 5
- Rear Rotor Center hole diameter(mm): 64.1
- Rear Rotor Plate thickness(mm): 9
Includes
2 Pcs Brake Disc(s)/Rotor(s) + 4 Pcs Brake Pads
Brake Maintenance Tips:
The following inspections and maintenance procedures can help prevent potential brake problems:
1. Check the brake fluid level at every oil change. Replace fluid according to the vehicle Owner¡¯s Manual recommendations.
2. Calipers and wheel cylinders should be checked at every brake inspection and serviced or replaced as required
3. Inspect the brake lines for rust, punctures, or visible leaks. (You may be able to do this, but consult a qualified technician if necessary.)
4. Check the thickness of your brake pads
A qualified technician should conduct the following:
1. Inspection of the brake hoses for brittleness or cracking.
2. Inspection of brake lining and pads for wear or contamination by brake fluid or grease.
3. Inspection of wheel bearings and grease seals.
4. Parking brake adjustments (as needed).
5. Connect the regulator to the new motor.
Feature Categories
You May Also Like