2 inch Rear Leveling Lift Kit For Chevrole Tahoe Suburban 2001-2019 2002 2012

Fitment

• Chevrolet | Avalanche | 2007~2013 | 5.3L/6.0L
• Chevrolet | Avalanche 1500 | 2002~2006 | 5.3L
• Chevrolet | El Camino | 1978~1987 | 3.3L/3.8L/4.3L/4.4L/5.0L/5.7L
• Chevrolet | Suburban | 2015~2020 | 5.3L/6.0L/6.2L
• Chevrolet | Suburban 1500 | 2001~2014 | 5.3L/5.7L/6.0L
• Chevrolet | Tahoe | 2001~2020 | 4.8L/5.3L/6.0L/6.2L
• Chevrolet | Trailblazer | 2002~2009 | 4.2L/5.3L/6.0L
• Chevrolet | Trailblazer EXT | 2003~2006 | 4.2L
• GMC | Envoy | 2002~2009 | 4.2L/5.3L
• GMC | Envoy XL | 2002~2006 | 4.2L/5.3L
• GMC | Yukon | 2001~2020 | 4.8L/5.3L/6.0L/6.2L
• GMC | Yukon XL | 2015~2018 | 5.3L/6.2L
• GMC | Yukon XL 1500 | 2001~2014 | 5.3L/6.0L/6.2L
• Hummer | H2 | 2003~2009 | 6.0L/6.2L
• Isuzu | Ascender | 2003~2008 | 4.2L/5.3L
• Oldsmobile | Bravada | 2002~2004 | 4.2L

Product Specifics

• Placement on Vehicle: Left Right Rear
• Quantity: 2X Rear Lift Spacers
• Lift Height: 2" Rear
• Actual Thickness: appr. 70mm/ 2.76"
• Note: Lift amount does NOT equal spacer thickness
• Drive: 2WD 4WD
• Condition: New
• OE Spec or Performance/Custom: Performance/Custom
• Other Part Number: GMC Yukon Envoy Hummer H2
• Adjustable: No
• Part Type: Suspension Lift Kit
• Kit or Single Part: Kit
• Ship from: CA/ GA
• Material: Billet Aluminum
• Surface Finish: Corrosion / Oxidation Resistant
• Included Hardware: Mounting Hardware
• Color: Black

Note

Lift spacer thickness and lift is not a 1 to 1 ratio due to the suspension geometry.

The ratio of lift to spacer thickness is not one to one. Due to the design of the independent suspension of the truck, when you extend the strut by 1-1/4" (for 2" lift), 1-5/8" (for 2.5" lift) or 1-3/4¡± (for 3" lift) the angle of the strut becomes steeper allowing the truck to experience approximately 2", 2.5" or 3¡± of lift, respectively. It is the combination of extending the strut and the change in angle that gives the full lift. Once the kit is properly installed and you have the truck aligned, you will see the lift you expect. Remember that the installation is not complete until you have the truck aligned.

This lift kit will raise the rear of your vehicle by a true 2".

The real thickness is 70mm.

Profession installation is highly recommended.

Please allow 1-3cm error due to manual measurement. Thanks for your understanding.

Other Kits

1.5" Rear