Notes: Does not fit 2WD Mega Cab, TRX or Rebel Models
Not Fit: Air ride suspension
Note(2): ONLY FITS 4X4 4WD£¬Does not fit 2WD or Mega cab
Lift spacer thickness and lift is not a 1 to 1 ratio due to the suspension geometry.
This lift kit will raise the front of your Dodge by a true 3" and the rear by a true 2".
The real thickness of front spacer is 48mm and the rear is 70mm.
The ratio of lift to spacer thickness is not one to one. Due to the design of the independent suspension of the truck, when you extend the strut by 1-1/4" (for 2" lift), 1-5/8" (for 2.5" lift) or 1-3/4¡± (for 3" lift) the angle of the strut becomes steeper allowing the truck to experience approximately 2", 2.5" or 3¡± of lift, respectively. It is the combination of extending the strut and the change in angle that gives the full lift. Once the kit is properly installed and you have the truck aligned, you will see the lift you expect. Remember that the installation is not complete until you have the truck aligned.