3 inch Front 1 inch Rear fits Chevrolet Silverado Sierra GMC 2007-2018 Leveling Lift Kit

Fitment

• Chevrolet | Silverado 1500 | 2007~2023 | 2.7L/3.0L/4.3L/4.8L/5.3L/6.0L/6.2L
• GMC | Sierra 1500 | 2007~2023 | 2.7L/3.0L/4.3L/4.8L/5.3L/6.0L/6.2L

Product Specifics

• Placement on Vehicle: Left,Right,Front,Rear
• Kit or Single Part: Kit
• Included Hardware: Mounting Hardware
• OE Spec or Performance/Custom: Performance/Custom
• Kit Parts Included: Strut Spacers
• Type: Kit
• Fit: Chevy Silverado Sierra GMC
• Lift Height: 3" Front 1" Rear
• Surface Finish: Texture black powder coat
• Surface Finish: Texture black powder coat

Note

Lift spacer thickness and lift is not a 1 to 1 ratio due to the suspension geometry.

The ratio of lift to spacer thickness is not one to one. Due to the design of the independent suspension of the truck, when you extend the strut by 1-1/4" (for 2" lift), 1-5/8" (for 2.5" lift) or 1-3/4¡± (for 3" lift) the angle of the strut becomes steeper allowing the truck to experience approximately 2", 2.5" or 3¡± of lift, respectively. It is the combination of extending the strut and the change in angle that gives the full lift. Once the kit is properly installed and you have the truck aligned, you will see the lift you expect. Remember that the installation is not complete until you have the truck aligned.

This lift kit will raise the front of your vehicle by a true 3" and raise the rear 1".

The real thickness of front is 50mm.

Profession installation is highly recommended.

Please allow 1-3cm error due to manual measurement. Thanks for your understanding.

Other Kits

2" Front 2.5" Front 3" Front 3" Front and 2" Rear 1" Rear 2" Rear