Brake Discs Rotors For 04-10 INFINITI QX56 05-15 Nissan Armada Rear 317.5mm 6 Lugs 2 Pcs
Fitment:
- INFINITI | QX56 | 2004~2010 | 5.6L
- Nissan | Armada | 2005~2015 | 5.6L
- Nissan | Pathfinder Armada | 2004 | 5.6L
- Nissan | TITAN | 2004~2015 | 5.6L
Brake Rotor is manufactured and tested to the strictest OE standards for unparalleled performance.
The new brake rotors are characterized by special drillings which combine the appealing aesthetic effect with brilliant performance and effective braking in all conditions.
The low environmental impact and the excellent corrosion resistance allow brake rotors to establish a new benchmark for protective treatment.
Feature
- Rotors are manufactured with G3000 iron castings to match OEM specifications for durability, reliability, and stability
- Rotors are 100% precision mill-balanced for smoother stopping and zero vibration at any speed
- Non-directional rotor finish promotes faster break-in and smoother stops
- Quality multi-layered shims and pad chamfering provide smooth and quiet braking
Product Specifics
- Items Included: Brake Disc(s)/Rotor(s)
- Finish: Silver Zinc Dichromate
- Placement on Vehicle: Left, Right, Rear
- Manufacturer Warranty: 1 Year
- Interchange Part Number: slotted 31329, rotor brake discs, Rear rotors
- UPC: Does not apply
- Material: G3000 Rotor Casting
- OE Spec or Performance/Custom: Performance/Custom
- Brake Rotor Size: 12.50in. (317.5mm)
- Rotor Style: Slotted
- Superseded Part Number: Driver passenger side disc brakes breaks, brakes and rotors
- Lug Count: 6
- Solid or Vented Rotor: Solid
- Interchange Part Number: driver passenger side disc brakes break,55054,55066, disc rotor
- Rear Rotor Total height(mm): 57.9
- Rear Rotor Center hole diameter(mm): 82.3
- Rear Rotor Pitch circle diameter(mm): 139.7
- Rear Rotor Plate thickness(mm): 14
- Rear Rotor Disk minimum thickness(mm): 12
Installation Tips
1.Loosening and Removing the lug nuts and then pulling off the wheel.
2.Removing the Brake Pads with a flat-blade screwdriver
3.Striking the surface of the rotor with a hammer to loosen the rotor, Pull the rotor off.
4.Remember to clean the hub surface, brake pad shims, and caliper bracket with a wire brush before you install the Brake Rotor, and spray the rear of the hub and the front of the rotor with brake cleaner.
5.Applying grease to the hub surface and the back of the brake pads.
6.Tightening the lug nuts in a crossing or star pattern.
Brake Maintenance Tips:
The following inspections and maintenance procedures can help prevent potential brake problems:
1. Check the brake fluid level at every oil change. Replace fluid according to the vehicle Owner¡¯s Manual recommendations.
2. Calipers and wheel cylinders should be checked at every brake inspection and serviced or replaced as required
3. Inspect the brake lines for rust, punctures, or visible leaks. (You may be able to do this, but consult a qualified technician if necessary.)
4. Check the thickness of your brake pads
The following should be conducted by a qualified technician:
1. Inspection of the brake hoses for brittleness or cracking.
2. Inspection of brake lining and pads for wear or contamination by brake fluid or grease.
3. Inspection of wheel bearings and grease seals.
4. Parking brake adjustments (as needed).
5. Connect the regulator to the new motor.
Includes
2x brake rotors
Feature Categories
You May Also Like