Brake Rotors And Ceramic Pads 00-02 Dodge Dakota 00-02 Dodge Durango Front 285.8mm 6Lugs 6Pcs
Fitment:
- Dodge | Dakota | 2000~2002 | 2.5L/3.9L/4.7L/5.9L
- Dodge | Durango | 2000~2002 | 4.7L/5.2L/5.9L
The most effective means to accomplish a proper brake job is to replace the rotors and pads.
If you want to retain your OE brake performance, 's product is the perfect kit.
has simplified your shopping experience by creating brake kits to fit your needs without searching out all the necessary components.
Feature
- The very same manufacturing process the original equipment manufacturers use
- High-density friction material for long pad life
- Reduced dusting for both Ceramic and Semi-metallic materials
- Quality multi-layered shims and pad chamfering provide smooth and quiet braking
Product Specifics
- Finish: Zinc Plated
- Brake Pad Compound: Ceramic Low Dust Formula
- Manufacturer Warranty: Lifetime
- UPC: Does not apply
- OE Spec or Performance/Custom: Performance/Custom
- Mounting Hardware Included: No
- Rotor Style: Drilled & Slotted
- Superseded Part Number: Driver passenger side disc brakes break,820, ceramic brake pads
- Custom Bundle: Yes
- Suitable for: Disc
- Type: Brake Disc Rotor
- Rotor Center hole diameter(mm): 73.4
- Item Thickness: 24
- Note: (Can fit 2WD or 4WD)
- Universal Fitment: No
- Items Included: Brake Disc, Brake Pad
- Material: Ceramic
- Placement on Vehicle: Front, Left, Right
- Interchange Part Number: drilled and slotted 5382, rotor brake discs, pad, Brake kit
- Rotor Material: G3000 Rotor Casting
- Rotor Outside Diameter: 11.25 in (285.8 mm)
- Pads Surface Finish: Thermal Scorched
- Fitment Type: Direct Replacement
- Bolt Hole Quantity: 6
- Solid or Vented Rotor: Vented
- OE/OEM Part Number: front pads and rotors, rotors and pads kit, replacing, Pads discs
- Item Height: 64(mm)
- Rotor Pitch circle diameter(mm): 114.3
- Rotor Disk minimum thickness(mm): 23
- Performance Part: Yes
- Features: Low Dust
Includes
2 Pcs Front Brake Disc(s)/Rotor(s)+4 Pcs Front Brake Pads
Brake Maintenance Tips:
The following inspections and maintenance procedures can help prevent potential brake problems:
1. Check the brake fluid level at every oil change. Replace fluid according to the vehicle Owner¡¯s Manual recommendations.
2. Calipers and wheel cylinders should be checked at every brake inspection and serviced or replaced as required
3. Inspect the brake lines for rust, punctures, or visible leaks. (You may be able to do this, but consult a qualified technician if necessary.)
4. Check the thickness of your brake pads
A qualified technician should conduct the following:
1. Inspection of the brake hoses for brittleness or cracking.
2. Inspection of brake lining and pads for wear or contamination by brake fluid or grease.
3. Inspection of wheel bearings and grease seals.
4. Parking brake adjustments (as needed).
5. Connect the regulator to the new motor.
Feature Categories
You May Also Like