Front Brake Rotors & Pads Kit 6 Pcs For 1999-2003 Ford F150 04 F150 Heritage
Fitment:
- Ford | F-150 | 1999~2003 | 4.2L/4.6L/5.4L
- Ford | F-150 Heritage | 2004 | 4.2L/4.6L/5.4L
The most effective means to accomplish a proper brake job is to replace the rotors and pads.
If you want to retain your OE brake performance, 's product is the perfect kit.
has simplified your shopping experience by creating brake kits to fit your needs without searching out all the necessary components.
Feature
- The very same manufacturing process the original equipment manufacturers use
- High-density friction material for long pad life
- Reduced dusting for both Ceramic and Semi-metallic materials
- Quality multi-layered shims and pad chamfering provide smooth and quiet braking
Product Specifics
- Items Included: Brake Disc(s)/Rotor(s)&Brake Pad(s)
- Finish: Silver Zinc Dichromate
- Pad Material: Ceramic
- Brake Pad Compound: Ceramic Low Dust Formula
- Placement on Vehicle: Front+Left+Right
- Warranty: 1 Year
- Interchange Part Number: drilled and slotted 54042, rotor brake discs, pad, brake kit
- UPC: Does not apply
- Material: G3000 Rotor Casting
- OE Spec or Performance/Custom: Performance/Custom
- Brake Rotor Size: 12.25in. (311.15mm)
- Mounting Hardware Included: No
- Surface Finish: Thermal Scorched
- Rotor Style: Drilled & Slotted
- Fitment Type: Direct Replacement
- Superseded Part Number: Driver passenger side disc brakes break,702, ceramic brake pads
- Lug Count: 5
- Custom Bundle: Yes
- Solid or Vented Rotor: Vented
- Suitable for: Disc
- Friction Material Slot Type: Slotted
- Front Rotor Total height(mm): 52
- Front Rotor Center hole diameter(mm): 90
- Front Rotor Pitch circle diameter(mm): 133
- Front Rotor Plate thickness(mm): 26
- Front Rotor Disk minimum thickness(mm): 25
Includes
2 Pcs Brake Disc(s)/Rotor(s) + 4 Pcs Brake Pads
Brake Maintenance Tips:
The following inspections and maintenance procedures can help prevent potential brake problems:
1. Check the brake fluid level at every oil change. Replace fluid according to the vehicle Owner¡¯s Manual recommendations.
2. Calipers and wheel cylinders should be checked at every brake inspection and serviced or replaced as required
3. Inspect the brake lines for rust, punctures, or visible leaks. (You may be able to do this, but consult a qualified technician if necessary.)
4. Check the thickness of your brake pads
A qualified technician should conduct the following:
1. Inspection of the brake hoses for brittleness or cracking.
2. Inspection of brake lining and pads for wear or contamination by brake fluid or grease.
3. Inspection of wheel bearings and grease seals.
4. Parking brake adjustments (as needed).
5. Connect the regulator to the new motor.
Feature Categories
You May Also Like