Radiator For 2008-2010 Ford F250 F350 Super Duty 6.4L

Fitment:

• Ford | F-250 Super Duty | 2008~2010 | 6.4L
• Ford | F-350 Super Duty | 2008~2010 | 6.4L
• Ford | F-450 Super Duty | 2008~2010 | 6.4L
• Ford | F-550 Super Duty | 2008~2010 | 6.4L

Features

• 100% Leak Tested, Direct Replacement
• Suitable for securing hoses in plumbing and automotive applications
• Built with high-density multi-lowered fins for maximum cooling efficiency
• OE design to ensure exact fit, form, and function for an easy drop-in installation

Product Specifics

• Manufacturer Warranty: 1 Year
• Interchange Part Number: Truck Radiator, Radiator, Aluminum Radiator Truck
• Performance Part: No
• Universal Fitment: No
• Placement on Vehicle: Engine Compartment
• Type: Radiator
• Material: Aluminum
• Core Material: Aluminum
• Tank Material: Plastic
• Quantity: 1PC Radiator
• Core Height: 48.9ln/124cm
• Core Length: 33.1In/84cm
• Core Thickness: 10.2In/26cm
• Inlet Diameter: 1.83 in
• Outlet Diameter: 1.83 in
• OE/OEM Part Number: 8C3Z8009B
• Superseded Part Number: 8C348009CA
• Radiator Cap: As the Picture shows
• Features: Downflow Radiator
• Row Count: 1 Row
• Engine Oil Cooler Included: No
• Transmission Oil Cooler Included: Yes
• TOC Material: Stainless Steel
• Notes: Please verify whether the item fits your vehicle or not by compatibility

1. How to clean the radiator

• Start the vehicle, to rise to normal temperature. Slowly open the tank cover, and the fluid shake from the tank after filling the mouth, the cleaner can be mixed with any brand of coolant. Idle running not less than 15 minutes, not cleaning vehicles not less than 30 minutes for two years. And then discharge coolant, and flush the water tank, until out of clear water, suitable for any water cycle system.
• After cleaning, after waiting for pipeline rehabilitation add fluid to the water tank, and inject new coolant and water purification.

2. How to replace the radiator

• Disconnect the battery.
• Drain the radiator fluid into a suitable container.
• Remove the old radiator.
• Take off any plastic covers around the radiator.
• Disconnect the electrical connector to the fan, and unbolt and remove the fan assembly.
• Disconnect the radiator hoses from the radiator.
• Disconnect the transmission cooling lines from the bottom of the radiator.
• Remove any clamps, brackets, or screws holding the radiator inside its frame.
• Lift the radiator up and out of the car.

3. How to install the new radiator

• Slide the new radiator into place.
• Connect any clamps or brackets that hold the radiator in place.
• Connect the transmission cooling lines carefully.
• Connect the engine cooling hoses to the radiator.
• Replace the fan and fan shroud.
• Reconnect the fan's electrical connection.
• Replace the plastic covers.
• Fill the radiator with fluid.
• Check your work to make sure that there are no leaks.
• (Tools need to be prepared: Screwdrivers, Wrenches, Drain pan)

Note

• Please keep children and pets away when replacing the radiator.
• 1. In project operation, the vehicle's normal temperature is 60 to 80 degrees.
• 2. Add detergent if the tank is too full and you can take some antifreeze.

Includes

• 1pc of brand new radiator