Window Regulator Motor 91-01 Ford Explorer 97-01 Mercury Mountaineer Power Front Pair

Fitment:

• Ford | Explorer | 1991~2001 | 4.0L/5.0L
• Ford | Explorer Sport | 2002~2003 | 4.0L
• Mercury | Mountaineer | 1997~2001 | 4.0L/5.0L

Feature

• Trustworthy replacement - engineered and tested to match the fit, function, and performance of the original window regulator on specified vehicles
• Quality assured - extensively tested by cycling thousands of times in an actual vehicle door to ensure a long, trouble-free service life
• Easy installation - reverse-engineered to match the original equipment shape and dimensions to provide a direct, seamless fit
• Reliable design - engineered in North America and backed by a long history of automotive aftermarket experience

Install the window regulator as follows:

Part1 Disconnecting the Window from the Motor

1. Remove the interior door panel.

2. Gently remove the plastic door cover.

3. Locate the window mounting bolts.

4. Move the window if necessary to access the bolts.

5. Remove the bolts while a friend supports the window.

6. Raise the window up into the door frame.

7. Use masking tape to secure the window in place.

Part2 Disconnecting the Motor and Regulator

8. Remove the window regulator bolts.

9. Locate and remove the window motor mounting bolts.

10. Disconnect the motor wiring harness connector.

11. Remove the motor and regulator through the access port.

12. Connect the regulator to the new motor.

Part3 Installing a New Power Window Motor

13. Slide the new motor and regulator back into place.

14. Replace the mounting bolts.

15. Reconnect the electrical connector.

16. Remove the masking tape and lower the window back down.

17. Insert the window mounting bolts.

18. Reinstall the plastic liner and interior panel.

Note

This window regulator is designed to work with factory-style motors only. Due to variations in aftermarket designs, replacement motors may not have the correct gear style.

Includes

1x Power Window Regulator